Shaker Screen Manufacturers

Abstract

How to ensure the efficient operation of the Shaker Screen The production of machine-made sand is inseparable from the crushing, sand-making and screening stages. The equipment commonly used in the screening stage is a circular Shaker S…

How to ensure the efficient operation of the Shaker Screen

The production of machine-made sand is inseparable from the crushing, sand-making and screening stages. The equipment commonly used in the screening stage is a circular Shaker Screen or a linear Shaker Screen. The role of screening different specifications of materials, the prerequisite for Shaker Screen to maintain efficient and stable operation is daily maintenance. This article will analyze with you the requirements of the feeding stage, maintenance cycle, screen replacement, bearing replacement and lubrication system of the Shaker Screen to ensure the safe and efficient operation of the Shaker Screen.

1. Requirements for the feeding stage of the Shaker Screen:

After the Shaker Screen is turned on normally, the material coming out of the crusher can be put into the Shaker Screen for screening, but it must be uniformly fed to avoid the situation that the compound cloth is uniform and the screening performance is poor.

2. How long is the maintenance cycle of the Shaker Screen?

According to different parts of the Shaker Screen and different degrees of maintenance, the maintenance cycle can be divided into weekly inspection, monthly inspection and annual inspection. Weekly check the use of small parts and components, such as whether screws are damaged and missing, Shaker Screens, springs, and sieve openings are not damaged, etc .; monthly inspection can be deepened to check whether the screen frame structure is welded. Gap or crack, if abnormal, repair welding is required in time. Every year, the equipment is overhauled, which is manifested in the disassembly and cleaning of the Shaker Screen to ensure that the machine is clean and there are no hidden dangers.

3. How to properly replace the Shaker Screen?

When the screen of the Shaker Screen is clogged (shown as too thick material on the screen), the screen surface is damaged, and the screening is uneven, it indicates that a new screen needs to be replaced, and the joint part of the screen must be replaced when the screen is replaced. The overlapping part of about 8 cm avoids the network disconnection at the joint when the force is applied.

4. What should I do if the vibration screen bearing is damaged or hot?

When the bearing of the Shaker Screen continues to heat up, it indicates that the bearing is damaged or the oil supply is unreasonable, and the bearing should be replaced or checked for oil filling in time.

5. Requirements of vibration screen lubrication system

The lubrication system is the guarantee of the normal operation of the Shaker Screen. After each shift of the equipment, a small amount of grease should be added. The viscosity of the grease should be determined jointly according to the operating environment, climate and operating conditions of the equipment.

Pre:

Submit Demands Online

Other Case

Marble Crusher Machine Manufacturer

Marble Crusher Machine Manufacturer

How to ensure the efficient operation of the Shaker Screen The production of machine-made sand is inseparable from the crushing, sand-making and screening stages. The equipment commonly used in the…

Stone Jaw Crusher Manufacturer In Jharkhand

Stone Jaw Crusher Manufacturer In Jharkhand

How to ensure the efficient operation of the Shaker Screen The production of machine-made sand is inseparable from the crushing, sand-making and screening stages. The equipment commonly used in the…

VSI Rotor Centrifugal Crusher

VSI Rotor Centrifugal Crusher

How to ensure the efficient operation of the Shaker Screen The production of machine-made sand is inseparable from the crushing, sand-making and screening stages. The equipment commonly used in the…