Grinding Mill Types2019-03-26

Abstract

Vertical Grinding Mill vs ball Grinding Mill 1. Energy consumption The vertical Grinding Mill has few moving parts, which belongs to low energy type and small vibration; all components of the ball Grinding Mill are basically in motion…

Too tired to read? Try staff service!

Engineer one-to-one for you, draw up plans in time, and provide investment estimates in time!

Online ChatGet Price

Vertical Grinding Mill vs ball Grinding Mill

1. Energy consumption

The vertical Grinding Mill has few moving parts, which belongs to low energy type and small vibration; all components of the ball Grinding Mill are basically in motion state, which belongs to high energy type and large vibration. In addition, compared with the ball Grinding Mill, the vertical Grinding Mill can save 30% to 40% energy by using the grinding roller to directly grind the grinding materials on the grinding plate.

Generally, the energy consumption of the vertical Grinding Mill can be reduced by 30% to 50% compared with that of the ball Grinding Mill under the condition of the same material grinding performance and the same product particle size.

2. Drying capacity

The vertical Grinding Mill combines grinding, grading and drying (high moisture content of materials) and collects them in one body. Materials are transported by hot air flow and when grinding materials with relatively high moisture content (such as coal, slag, etc.). The intake air temperature can be controlled to make the product reach the final humidity. The vertical Grinding Mill can dry materials with moisture content of 12% – 15%, and has strong drying capacity. Even if the ball Grinding Mill is dry, the moisture can only dry 3% – 4%. Material Science. Therefore, the vertical Grinding Mill used in the production of materials with high moisture content, not only saves the economic cost, but also saves the time cost.

3. Discharge method

The discharge of the vertical Grinding Mill is forced to avoid excessive grinding. After the material is crushed by the grinding roller on the grinding plate, it is taken away by the high-speed air flow of the air ring at the edge of the grinding plate, and the qualified fine powder is collected together with the dust collection device. Air flow through the powder concentrator.

The discharge of ball Grinding Mill is dump type, which is easy to over grind, especially overflow ball Grinding Mill. The material will overflow automatically. When the material height is higher than the discharge port, it will discharge automatically, consume energy and be easy to over grind.

Related Solution

Next:

Submit Demands Online

Hot Sale